We all love the comfort and convenience an air mattress provides until we have to deal with a bubble.
Bubbles do not only deform the bed, but they also make it uncomfortable to sleep in. In fact, most of the people who have this problem end up purchasing another mattress. So it won’t be surprising if you also decided to look in that direction.
However, since you’re here, it’s obvious you want to fix the problem rather than spending more money on a new mattress. In this case, it’s very important that you discover what is behind the bubble so you can take the appropriate steps to fix it.
In this article, we are going to look at some of the things that can make an air mattress well and how to get rid of it without any issues.
We will start first by answering the all-important question…
What causes a bubble in an air mattress?
Below are the most common causes of bubbles in airbeds:
This is probably the most common cause of bubbles in air mattresses. And it doesn’t come much as a surprise given how delicate the seams are.
Blowing excess air into the mattress can place a lot of pressure on the seams causing it to stretch beyond the limit. If this happens seldomly, then you shouldn’t have any issues. However, if you do it every now and then, then you will probably need to replace the mattress sooner.
Sometimes over-inflation can cause the seam in an airbed to rupture, which is usually something that cannot be repaired. However, it may still be possible to sleep on the mattress, but you must avoid blowing it too much again.
Most of the time, over-inflation can be resolved by allowing some of the air in the mattress to go out.
Bad Factory Bonding
It is not uncommon for some new mattresses to develop bubbles after a few uses. When this happens, there’s a huge chance the problem originated when the product was being manufactured.
However, it is possible that something went wrong with the seams and was concealed without notice. This happens a lot of times as the seams in this kind of products are usually very delicate.
We strongly advise returning the mattress if it’s covered by a warranty so a new one can be sent to you.
Too Much Weight
Another thing that can inflate an airbed is loading it beyond its weight limit.
Each mattress usually has a maximum weight capacity, which, when exceeded, can also put a strain on the seams inside. Over-stretching the seams can lead to damage and, consequently, the formation of bubbles in some parts of the mattress.
To ensure this doesn’t happen, avoid packing too much load on the bed. Check the specified weight capacity and try not to exceed what is written.
Effect of Ageing
No item is designed to last forever, and air mattresses are no different. Apart from the few causes we’ve highlighted above, an airbed can also develop bubbles due to natural wear and tear.
While normal regular beds may last for as long as 20 years, air mattresses have a shorter lifespan of 1-4 years.
You may begin to notice bubbles in the mattress after using it for a long time. When this happens, don’t be alarmed. It simply means your airbed is getting old and the seams are wearing out. You can either patch it to continue using it, or you might consider getting a new mattress.
How to fix air mattress bubble?
Bubbles do not necessarily denote the end of your mattress. So purchasing a new product might not always be the best solution. Most of the time, the problem can be resolved. It’s just a matter of how.
Below are the steps we recommend to fix a bubble problem:
Step 1: Get the Mattress Ready
The first thing you should do before fixing a bubble in your mattress or any other problem for that matter is to prepare the bed first. While this might sound obvious, it’s a very important step before anything else.
So how exactly do you prepare a mattress?
Simple – start by taking out the sheets, pillows and pillowcases, pads, and any other thing that might be on top of the mattress. While large bubbles may be found easily, smaller ones might not be that obvious. So you need to remove everything that might stand in the way.
If the bed has an internal pump that uses electricity, then make sure you disconnect it from the power outlet.
Step 2: Deflate the Bed Completely
Once you’ve successfully uncovered where the bubble is, the next step is to deflate the mattress completely.
It doesn’t make sense of fixing a bubble when the bed is still fully inflated. So before you do anything, let the air out first. This would be much easier if the bed features an external air pump. In this case, all you have to do is open the nozzle for the air to come out.
Step 3: Use Pressure
To hasten up deflation, you can put pressure on the mattress. Some beds may come with a deflation dial, which makes things much easier.
Continue to apply pressure until you achieve full deflation.
Don’t apply pressure on the part of the mattress where you have the bubble until it has completely disappeared.
Step 4: Inflate the Bed Again
Now that you’ve removed the bubble go ahead and inflate your mattress again.
A bubble is not something anyone would like to see in their mattress. Apart from making your bed look ugly, they can also make you feel uncomfortable. But you don’t necessarily need to buy a new mattress to make the problem go away. Instead, you can fix the problem and start enjoying your bed again.
Hopefully, you now know what makes an air mattress swell and how to make it go away. Let us know if you have any more questions. Meanwhile, drop your comments and let us know what you think about the article.